E-11
Connecting Personal Computers and Video Equipment
Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at
conferences, lectures, and on other occasions. Connecting this unit to a DVD player or other video equipment source in
combination with an audio/video amplifier and speaker system will allow you to enjoy convincing home theater.
Connections with Personal Computer
Check the following before making connections with the personal computer.
•
A suitable resolution for this projector is 1024
⳯
768 dots (XGA). The maximum displayable resolution is 1280
⳯
1024 dots
(S-XGA). However, sizes of characters or lines may be uneven when displaying a signal with resolutions other than
1024
⳯
768 dots.
Make changes to a displayable resolution at the personal computer side. Check with “Table of Supported Frequency” on Page
E-56.
•
The setting method for the personal computer will differ depending on the specific model. Please read the personal computer
instruction manual or the on-line help information, or contact the manufacturer of your personal computer.
Connect the projector’s RBG connector using the included RGB signal cable.
•
Make the connection via the supplied RGB signal cable.
•
The projector has been set to “Auto” at the factory; however, if it does not project, change the input setting to “RGB” using the
menu sequence of [Setup]
→
[Input Format]
→
[RGB].
See “Input Format” on Page
E-44
.
MONITOR OUT
Personal
computer
RGB signal cable (Supplied item)
Note:
Before making connections, check the power of the projector and the equipment to be connected is switched off.
Summary of Contents for TDP-P7
Page 69: ......
