Toshiba TDP-P7 Owner'S Manual Download Page 27

Page: 27 / 69

E-16

AUT

DIO

USE

S-V

VID

ON/ST

ANDBY

ATUS

MENU

Firmly plug in all the
way.

To wall outlet

Power Cord Connections and Switching the Power On/Off

There is an order in which the power cord is connected and the power is switched on/off.

Operating

Note:

• When the power cord will be unplugged from the well outlet, place the projector near the well outlet so that it may be reached easily.
• Press the ON/STANDBY button after the ON/STANDBY indicator is lit in amber.

Connect the AC IN connector of the projector and the well outlet by using the supplied power cord.

The ON/STANDBY indicator will light in amber, and the unit will enter the standby mode.

ON/STANDBY

STATUS

Lit amber

Switch on the power of the connected equipment

Switch on the projector power

Press the ON/STANDBY button.

The first time the power is switched on after purchase, [Menu
Language Select] will be displayed. See Page

E-17

for infor-

mation about language selection.

• When the power is turned on, the ON/STANDBY indicator starts

flashing green, then stops flashing after about 60 seconds. If
the STATUS indicator lights green at this time, the lamp mode
is set to “Eco”. See

E-43

for instructions on selecting.

• If the power does not come on, see “When the STATUS Indica-

tor is Lit or Flashing” on Page

E-49

The projector is now capable of regular projection.

ON/STANDBY

STATUS

(button on main unit)

STATUS

ON/STANDBY

STATUS

ON/STANDBY

STATUS

ON/STANDBY

This indicator is also lit green in Eco-mode.

Flashing green

(Approximately 60

seconds)

Lit green

Power is on

Lit amber

LASER

AUTO

RGB

VIDEO

QUICK

STANDBY

햲

Turn the lens cover clockwise.

햳

When the lens cover stops with a click, the projector is ready for projection.

/ST

STA

TUS

MEN

ON/ST

ANDBY

STAT

MENU

QUICK

MENU

Summary of Contents for TDP-P7






































































Search results

Summary of Contents for TDP-P7

Reviews:

Related manuals for TDP-P7

Brands by name

Popular brands

Toshiba TDP-P7, Owner'S Manual

Search results

Summary of Contents for TDP-P7

Reviews:

Related manuals for TDP-P7

Brands by name

Popular brands