Central remote controller
Owner’s Manual
10
-EN
When “--” is displayed on the “Control” screen of All or Zone
When a blank is displayed on the Unit “Control” screen
When the following is displayed on the Unit “Control” screen
Menu screen
Displayed when changing settings other than the standard settings (temperature, operation mode, air volume, air direction).
Press [
] (control) on the “Control” screen to enable display.
The display items are different on the “Menu” screen of All and Zone and the Unit “Menu” screen.
Displayed when the air conditioner settings do not match.
• When you have changed the settings on the “Control” screen of All or Zone but
there is an air conditioner whose settings cannot be changed because there is no
corresponding function
• When you have made an individual change on the Unit “Control” screen after
changing the settings on the “Control” screen of All or Zone
• If you issue a command while - - is displayed, the settings of the local remote
control for that item are not changed.
Displayed when there are functions that cannot be changed.
The screen on the left is an example of a model in which air direction cannot be
set.
Blank spaces cannot be selected.
The general-purpose device control interface is registered.
The only possible operation is start/stop operation.
• When a device other than an air conditioner is connected
In the case of Total Heat exchange, Ventilation Settings can be done with the
menu.
Menu name
Functions
Filter Sign Reset
Used to cancel the FILTER Sign. (P.25)
The FILTER timer is also reset.
The FILTER timer is reset even if the FILTER Sign is not
issued.
Ventilation
Used to control the Total Heat exchange Unit (indoor unit
dedicated to ventilation) linked with the air conditioner. (P.23)
This menu is also valid for Total Heat exchange alone.
Off Timer
Used to set the time until operation stops. (P.19)
Not displayed on the Unit “Menu” screen.
On Timer
Used to set the time until operation starts. (P.19)
Not displayed on the Unit “Menu” screen.
Energy saving
operation
Used for energy-saving operation that limits the output of the
air conditioner. (P.22)
Not displayed on the Unit “Menu” screen.
Key lock
Used to prohibit the operation of the local remote control
buttons. (P.26)
Information
Used to check the model number and version information of
the Unit. (P.27)
All
Next
25.0
°C
Auto
Next
25.0
°C
ON/OFF
Next
All Menu (1/2)
1.
Filter Sign Reset
2.
Ventilation
3.
Off Timer
4.
On Timer
5.
Energy saving operation
All Menu (2/2)
6
Key lock
7.
Information
Summary of Contents for TCB-SC643TLE
Page 31: ...MEMO ...
