Central remote controller
Owner’s Manual
25-
EN
This section explains how to configure the reset settings necessary for cleaning the filter and how to configure the settings to
use the unit as a remote control.
After cleaning the filter, perform Filter Sign Reset and cancel the FILTER Sign displayed on the screen.
Depending on the range of the area to be set, display the “Control” screen of All, Zone, or Unit and perform the operation.
The filter timer is also reset.
The FILTER timer is reset even if the FILTER Sign is not issued.
●
REQUIREMENT
After cleaning the filter, be sure to perform Filter Sign Reset.
Other Features
Cancel FILTER sign (Filter Sign Reset)
1
Display the “Control” screen of All, Zone, or Unit. (P.11)
2
Press [ ] (Control).
The “Menu” screen is displayed.
3
Use [
∧
] [
∨
] to select “Filter Sign Reset”, then press [
]
(Confirm).
The “Admin. Password Entry” screen is displayed.
4
Enter the 4 digit password then press [
] (Confirm).
Press [
<
] [
>
] to select the digit and
[
∧
] [
∨
] to select the number.
The “Filter Sign Reset” screen is displayed.
5
Press [
] (Confirm).
“Reset Complete” is displayed. Press [
] (Return) to return to the
“Menu” screen.
3, 4, 5
2
“Control” screen
Auto
All
Next
All Menu (1/2)
1.
Filter Sign Reset
2.
Ventilation
3.
Off Timer
4.
On Timer
5.
Energy saving operation
Admin. Password Entry
0
0
0
0
Filter Sign Reset
Reset
Summary of Contents for TCB-SC643TLE
Page 31: ...MEMO ...
