Toshiba TCB-SC643TLE Owner'S Manual Download Page 5

Page: 5 / 32

Central remote controller

Owner’s Manual

Installation Precautions

Usage Precautions

CAUTION

Check the

installation

location

Do not install in areas with high humidity or
vibration.

Doing so may cause a failure.

Check the

installation

location

Do not install in direct sunlight or near heat
sources.

Doing so may cause a failure.

Check the

installation

location

Do not install in areas where noise is
generated.

Doing so may cause malfunction.

Check the

installation

location

Do not install the air conditioner in a place
where combustible gas may leak.

Gas leaking and accumulating around the
product may cause a fire.

Prohibited

Do not drop the product or apply strong
shock.

Doing so may cause a failure.

If anything

is abnormal

turn off the

power

If anything is abnormal, stop operation and
turn off the original power supply, then
contact the dealer from whom you
purchased the unit.

Continued operation with an abnormality may
cause fire or electric shock.

Instructions

When cleaning and checking, turn off the
earth leakage breaker.

Failing to do so may cause injury.

Summary of Contents for TCB-SC643TLE

































Search results

Summary of Contents for TCB-SC643TLE

Reviews:

Related manuals for TCB-SC643TLE

Brands by name

Popular brands

Toshiba TCB-SC643TLE, Owner'S Manual

Search results

Summary of Contents for TCB-SC643TLE

Reviews:

Related manuals for TCB-SC643TLE

Brands by name

Popular brands