Central Remote Controller
Installation Manual
22
-EN
When "Central control Address" is selected
To Change the Group Zone of Multiple Indoor Units
1
Perform steps 1 to 2 in "Change the Zone to which the
Indoor Unit Belongs" (P.21).
The "Address List" screen is displayed.
• You can set either "Central control Address" or "Line Address".
2
Put the cursor on the first address, and then press [
≡
]
(Menu) and [ ] (Confirm) at the same time.
Multiple units are selected.
• If you press [
] (Return), the selection of multiple units is cancelled, and
the cursor returns to the first address.
3
Select the last address by using [<], [
˄
], [
˅
], and [>],
and then press [ ] (Confirm).
The "Zone List" screen is displayed.
4
Select a zone number by using [<], [
˄
], [
˅
], and [>], and
then press [ ] (Confirm).
The "Address List" screen returns.
• The selected zone no. is displayed to the right of the address.
• The number in < > is the number of units for which the zone No. is set.
• You can make the settings for up to 64 units.
• An error screen is displayed if you set 65 or more units.
Summary of Contents for TCB-SC640U-E
Page 35: ...DEB5219151 2 ...
