Central Remote Controller
Installation Manual
21
-EN
Change the Zone to which the Indoor Unit Belongs (Zone Settings)
1
On the "Servicing Menu" screen, select "Zone
Settings" and press [ ] (Confirm)
The "Zone Settings" screen appears.
• The indoor unit list display can be selected from the Central control
address order or the Central control address order.
When Central control address
is selected
2
Select "Central control address" using [
˄
] and [
˅
]
then press [ ] (Confirm)
The "Address list" screen appears.
• Press [
] (Control) to go to the next page.
3
Press [<] [
˄
] [
˅
] [>] to select the address, then press
[ ] (Confirm)
The "Zone list" screen appears.
4
Press [<] [
˄
] [
˅
] [>] to select a zone No., then press
[ ] (Confirm)
The display returns to the "Address List" screen.
• The selected zone No. appears to the right of the address.
• The number inside < > is the number of units for which the zone No. is set.
• Up to 64 units can be set.
• Air conditioners and Air to Water Heat Pump cannot be set in the same
zone.
• If there is both a water temperature control unit and a room temperature
control unit, set them in different zones.
If they are set in the same zone, it will not be possible to apply batch
settings by zone or to set the temperature based on a schedule.
Summary of Contents for TCB-SC640U-E
Page 35: ...DEB5219151 2 ...
