DOC:MAINTENANCE MANUAL
MODEL:T5200
MODEL:T5200C
CHAP:4 REPLACEMENT PROCEDURES
SECT:4.15, REMOVING/REPLACING THE CONVERTER BOARD, THE VOLUME BOARD AND
THE
DOC_ID:4.15 T5200
LANG:ALL
TEXT:
<fig id=MMS\5200\52004_21.TIF>Page 4-21</fig>
4.15 REMOVING/REPLACING THE CONVERTER BOARD, THE VOLUME BOARD AND THE
LATCH ASSEMBLY
1. Remove the PDP unit as directed in section 4.14 in order to remove
the four screws (A) from hinge assembly (B).
2. Take off the hinge assembly, then remove the converter unit (C)
<fig id=MMS\5200\52004_21.TIF>Figure 4-29</fig> Removing the converter
unit
<fig id=MMS\5200\52004_22.TIF>Page 4-22</fig>
3. Take off the metal ring (D) from the connector guide of the
converter.
<fig id=MMS\5200\52004_22.TIF>Figure 4-30</fig> Removing the metal ring
4. Release the two latches (E) of the converter cover (F), to remove
the converter cover from the converter case (G).
<fig id=MMS\5200\52004_22.TIF>Figure 4-31</fig> Removing the converter
cover
<fig id=MMS\5200\52004_23.TIF>Page 4-23</fig>
5. Remove the three screws (H) from the converter board (I) then lift
up the converter board.
<fig id=MMS\5200\52004_23.TIF>Figure 4-32</fig> Removing the converter
board
6. Remove the screw (J) from the volume board (K) to remove it.
7. Pull out the latch assembly (L) form PDP cover.
<fig id=MMS\5200\52004_23.TIF>Figure 4-33</fig> Removing the volume
board and latch assembly
8. To install the converter board, the volume board and the latch
assembly follow the above procedures in reverse.
<fig id=MMS\5200\52004_24.TIF>Page 4-24</fig>
File No. : 960-011
~~
