After the floppy disk is formatted, the following message will
appear.
Format complete
Another format (1:Yes/2:No) ?
(5) If you type 1 and press Enter key, the display
will return to the message in (3) above. If you type 2
the display will return to the DIAGNOSTICS MENU.
<fig id=MMS\5200\52003_41.TIF>Page 3-41</fig>
3. COPY Selection
(1) When COPY is selected, the following message will appear.
DIAGNOSTICS - FLOPPY DISK COPY: VX.XX
Type select (0:2DD-2DD, 1:2D-2D, 2:2D-2RD, 3:2RD-2HD) ?
(2) Select a media/drive type number. Type the number. The
following message will then appear.
Insert source disk into drive A:
Press any key when ready.
(3) Remove the diagnostics disk from the FDD and insert the
source disk; press any key. The following message will appear,
then start the copy to memory.
[FDD TYPE]: TRACK = XXX
[FDD TYPE]: READ = X
[FDD TYPE]: SECTOR = XX
Copy start
[[track, head = XXX XX]]
(4) Remove the source disk from the FDD and insert the target
disk (formatted); press any key. The [[track, head = XXX
X]] message will appear, then start the copy to target
disk. When coping cannot be done with one operation, message
(2) is displayed again. Repeat the operation. After the floppy
disk has been copied, the following message will appear.
Copy complete
Another copy (1:Yes/2:No) ?
(5) If you type 1 the display will return to the message in
(1) above. If you type 2 the display will return to the
DIAGNOSTICS MENU.
4. DUMP Selection
(1) When dump is selected, the following message will appear.
DIAGNOSTICS - HARD DISK & FLOPPY DISK DUMP: VX.XX
format type select (0:2DD,1:2D,2:2RD,3:HDD) ?
<fig id=MMS\5200\52003_42.TIF>Page 3-42</fig>