Subtest 03 Wraparound
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³NOTE: A printer wraparound connector is necessary for ³
³executing this test. Wiring diagram of the printer ³
³wraparound connector is described in section 3.25. ³
³The data, control, and status lines will be checked
with³
³the printer wraparound connector. ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
OPERATION
1. When you select the
subtest 01, 02 or 03, the following message
will appear.
Select the channel number (1-3) ?
Select the printer channel number, then type in the number.
The T5200 supports three printer channels.
2. After pressing the Enter, the
subtest is executed.
~~
DOC:MAINTENANCE MANUAL
MODEL:T5200
MODEL:T5200C
CHAP:3 TESTS AND DIAGNOSTICS
SECT:3.10, ASYNC TEST
DOC_ID:3.10 T5200
LANG:ALL
TEXT:
<fig id=MMS\5200\52003_20.TIF>Page 3-20</fig>
3.10 ASYNC TEST
In subtest 01 to subtest 05, data transmission is done with the
following format:
Speed: 9600 BPS
Data 8 bits and one parity bit (EVEN)
One stop bit
Data pattern: 20H to 7EH
<fig id=MMS\5200\52003_21.TIF>Page 3-21</fig>
Subtest 01 Wraparound (channel 1)
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ NOTE: The RS-232-C wraparound connector must be connected to ³
³ SERIAL A CONNECTOR to execute this test. The wiring diagram of ³
³ the RS-232-C wraparound connector is described in section 3.25. ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
A data send/receive test is performed with the
wraparound connector for the channel 1.
Subtest 02 Board (#1) <=> board (#2)