Toshiba T200, User Manual

Page: 55 / 180

T200, T200CS
3-5
7. Move the highlight bar to the desired option from the subtest menu and tap or
press
Enter
. The following message will appear:
TEST LOOP : YES NO
Selecting
YES
increases the pass counter by one each time the test cycle ends and
restarts.
Selecting NO returns the sub-test menu to the main menu after the test is com-
plete.
8. After making the Test Loop selection, the following message will appear:
ERROR STOP : YES NO
Selecting YES stops the test program when an error is found and displays the
operation guide on the right side of the display screen as shown below:
ERROR STATUS NAME [[ HALT OPERATION ]]
1: Test end
2: Continue
3: Retry
These three selections have the following functions:
1: Terminates the test program and exits to the subtest menu.
2: Continues the test.
3: Restarts the test from the beginning.
Selecting
NO
keeps the test running even if an error is found.
9. Move the highlight bar to the desired option and tap or press
Enter
.
Table 3-1 in Section 3.3 describes the function of each test on the subtest menu.
Table 3-3 in Section 3.16 describes the error codes and error status for each error.