Toshiba Strata CTX DKT2104-CT User Manual Download Page 88

Page: 88 / 104

Features

Two (Tandem) Line Connection

Strata DKT2104-CT Cordless Digital Telephone 5/00

Two (Tandem) Line Connection

This feature enables you to connect two lines using a [DN] or

/LQH

, then drop out of

the conversation.

1. Press

&1)751

while talking to an
external party.

You hear dial tone, the [DN] LED flashes at the
conference rate.

2. Dial a line access

code and then the
external telephone
number of the other
party.

See

“Access Codes”

Page 83

Ask your System

Administrator for the proper code to be used for this
type of call.

3. Press

&1)751

after the party
answers.

The [DN] LED lights steady and all parties are
conferenced.

4. If you get a busy or

no answer, press
[DN] +

&1)751

You are returned to the original call. You hear dial
tone and the [DN] LED flashes at the exclusive-hold
rate.

5. Press

&1)751

and

hang-up.

The [DN] LED continues to flash at the
exclusive-hold rate and the two lines are connected.
The LED turns off when the external parties hang up.

6. Press

WDON

If the public telephone company provides auto
disconnect, the connection may release automatically
when the parties hang up. If not, the lines must be
supervised to be disconnected.

Summary of Contents for Strata CTX DKT2104-CT









































































































Search results

Summary of Contents for Strata CTX DKT2104-CT

Reviews:

Related manuals for Strata CTX DKT2104-CT

Brands by name

Popular brands

Toshiba Strata CTX DKT2104-CT, User Manual

Search results

Summary of Contents for Strata CTX DKT2104-CT

Reviews:

Related manuals for Strata CTX DKT2104-CT

Brands by name

Popular brands