Handset Operation
Tone or Voice First Signaling
Strata DKT2104-CT Cordless Digital Telephone 5/00
27
➤
To set DKT mode
Tone or Voice First Signaling
If you are a new user of the cordless digital telephone, ask your System Administrator
if the Strata DK system has Tone or Voice First Signaling. Tone Signaling rings and
Voice First has a long tone followed by the caller’s voice. You can toggle between
Tone and Voice First Signaling on a call-by-call basis.
Both signals are enabled in system programming and determine how you make and
answer calls.
➤
To change the signaling
➤
To answer a Tone First Signaling call
➤
Press
WDON
. You hear successive ring tones.
➤
Pick up the DKT
telephone.
You hear dial tone. This displays on the handset and
the DKT LCD.
1. Press [DN] + station
[DN].
If Tone First Signaling is enabled, you hear a one-
second ring every four seconds. If Voice First Signal is
enabled, you hear a tone burst.
2. Press
.
The other signaling is activated.
1 2
$ 3 5 : ( '
Summary of Contents for Strata CTX DKT2104-CT
