Toshiba Strata CTX DKT2104-CT, User Manual

Page: 45 / 104

Handset Operation
Transferring Calls
Strata DKT2104-CT Cordless Digital Telephone 5/00
33
Transferring Calls
You can transfer calls to a idle or busy station, but you cannot transfer calls to a station
that is in the DND mode.
Active Calls
Note You cannot transfer calls to a station that is DND.
1. Press
&1)751
. You hear dial tone and the Line or [DN] LED flashes
at the conference rate.
2. Enter the transfer-to
[DN], Hunt Group
[DN], or ACD group
[DN].
You hear a single tone, unless the call was made with
Tone First Signaling. Then, you hear ringing tone.
3. Announce the call The Line LED changes to steady red when the called
station connects with the transferred call.
If the called station does not answer, you receive a
recall ring. Your station or
[DN] must be idle to
receive the recall.
...or press
/LQH
,
[DN] + to
reconnect to the
transferred call
before the called
party answers or busy
tone is received.
After you hang up, the Line LED begins an on-hold
flash, or the [DN] LED goes out if you transferred the
call from a [DN].
4. Press
WDON
. The Line LED changes to steady when the called
station connects with the transferred call.