background image

E

ng

lis

h

WARNING

 

Under no circumstances should you try to repair the DVD player yourself, as this will invalidate the 

warranty. Do not open the DVD player as there is a risk of electric shock.

 

If a fault occurs, first check the points listed below before taking the DVD player for repair. If you are unable 

to remedy a problem by following these guides, consult your dealer or TOSHIBA for help.

Troubleshooting

    

 Problem                                                                                  Solution

                               

No power 

     

No picture

Distorted picture  

Picture clipped

Completely distorted picture or 

black /white  picture with DVD.

No sound / distorted sound

No audio at digital  output

  

 

No sound and picture

Disc cannot be played

Picture freezes momentarily during playback

No return to start-up screen when disc is removed

The player does not respond to the Remote Control

-Check if the AC power cord is properly connected.

-Press the 

I/

2

ON/STANDBY on the front of the DVD

/STANDBY on the front of the DVD

STANDBY on the front of the DVD 

player to turn on the power.

-Refer to your TV' s manual for correct Video In

' s manual for correct Video In

s manual  for correct Video In 

channel selection. Change the TV channel until you see 

the DVD screen.

-Check if the TV is switched on.

-Sometimes a small amount of picture distortion may 

appear depending on the disc being played back. This 

is not malfunction.

-May be caused by View Mode Setting (see page 18). 

Set to Original for normal viewing.

-Connect DVD Player directly to the TV. 

-Make sure the disc is compatible with the DVD player.

-Ensure that the DVD Player's setting is set to match

's setting is set to match

s setting is set to match 

that of  the disc and your TV.

-Adjust the volume.

-Check that the speakers are connected  correctly.

-Check the digital connections.

-Check if your receiver can decode MPEG-2 or DTS 

and if not, please make sure the digital output is set to 

PCM.

-Check if the audio format of the selected audio 

language matches  your receiver capabilities.

-Check that the cable is connected to the correct device 

(See Connecting to television).

-The DVD

+

R/RW must be finalized and in Video mode 

format.

-Ensure the disc label is facing up.

-Check if the disc is defective by trying another disc.

-Wrong region code.

-Check the disc for fingerprint/scratches and clean with 

a soft cloth wiping from centre to edge.

-Reset the unit by switching the player off, then on 

again.

-Aim the Remote Control directly  at the sensor on the 

front of the player.

-Reduce the distance to the player.

-Replace the batteries in Remote Control.

-Re-insert the batteries with their pola/- signs)as 

indicated.

Summary of Contents for SD3010KB



























Reviews: