background image

E

ng

lis

h

DVD Menu Options

 

Brightness     

             

Contrast       

    

Tint                

   

Color             

    

                                                 

0

                                                 

0

                                                 

0

                                                 

0

Close

D

  Press 

 / 

 to highlight one of the following options.

 

Brightness

 

Increase the value to brighten the picture or vice 

versa. Choose zero (0) for average setting.

 

Contrast

 

Increase the value to sharpen the picture or vice 

versa.  Choose zero (0) to balance the contrast.

 

Tint

 

Increase the value to darken the picture or vice 

versa.  Choose zero (0) for average setting.

 

Color

 

Increase the value to enhance the colour in your 

picture or vice versa. Choose zero (0) to balance the 

colour.  

E

  Press 

  /  

 to adjust the setting that best suits 

your personal preference.

F

  Repeat steps 

D

E

 to adjust your picture 

preference.

G

  Press 

 / 

 to select 

Close

 and press OK to 

confirm.

 

 

HD Resolution

 

The video output of the DVD player can be selected 

as “Auto”, “480p/576p”, “720p”, “1080i” or “1080p”.

A

  In 

Video 

'

, press 

 / 

 to select  { 

HD Resolution 

},   

then press 

.

B

  Use 

 / 

 to select a setting and press OK to 

       confirm.

       Tip:

       

If the Video Out mode is not set to"HDMI", you 

cannot select the “HD Resolution”.

       

JPEG Interval

 

You can continuously playback all JPEG files 

automatically. Set “JPEG Interval” to “5 Seconds”, “

10 Seconds” or “15 Seconds”.

A

  In 

Video 

'

, press 

 / 

 to select  { 

JPEG Interval 

},   

then press  

.

  

Off

 }

 

Plays back one file at a time.

 

5 Seconds

 }

 

Plays back images in the form of a slide show at 5 

seconds intervals.

 

10 Seconds

 }

 

Plays back images in the form of a slide show at 10 

seconds intervals

 

{ 1

5 Seconds

 } 

 

Plays back images in the form of a slide show at 15 

seconds intervals

B

  Use 

 / 

 to select a setting and press OK to 

 

confirm.

Using the Audio setup menu

A

  Press SETUP on the remote control.

  

The system setup menu appears.

 

:

:
:

Digital Output          
Night  Mode                 
Down Sampling          

All
Off
On

Language

Video

Audio

Misc

Rating

:

3D Effects                 

Off

B

  Press 

 / 

 to select { 

Audio

 }, then press 

.

C

  Press 

 / 

 

to select an item, then press 

 to       

access.

 

Example: { 

Night Mode

 }

  

The options for the selected item appears.

  

If the selection in the menu is greyed out, that 

means the feature is not available or not possible to 

change at the current state.

D

  Use 

 / 

 to select a setting and press OK to 

 

confirm.

 

Example: { 

On

 }

  

The setting is selected and setup is completed.

E

  To exit, press SETUP.

 

Digital Output

 

Select this if you connect to a multichannel decoder/

receiver.

A

  In 

'

Audio

'

, press 

 / 

 to select { 

Digital Output

 }, 

then press 

.

 

Off

 }

 

To deactivate the digital audio output. For example, if 

you use the AUDIO OUT jacks to connect to a TV or 

stereo system.

 

PCM

 }

 

Select this if the connected device is not capable of 

decoding multichannel audio. The DVD player will 

convert the Dolby Digital signal to PCM (Pulse Code 

Modulation).

 

All

 }

 

Select this if the connected device has a built-in 

multichannel decoder that supports one of the  

multichannel audio format (Dolby Digital, DTS).

B

  Use 

 / 

 to select a setting  and press OK to 

confirm. 

 

 

Tip:

 

-When playing MPEG, MP3 and set Digital Output to 

{All}, the player will output PCM signals.

  

 

Night Mode

 

This mode optimizes playback of sound at low 

volume. High volume outputs will be softened and 

low volume outputs are brought upward to an audible 

level.

A

  In 

' 

Audio

, press 

 / 

 to select { 

Night Mode

 }, 

then press 

.

 

Off

 }

 

Turns off night mode feature. Select this to enjoy the 

surround sound with its full dynamic range.

 

Helpful hint

:  Press 

 to go back to previous menu item.

 

 

          Press SETUP to exit the menu item.

Summary of Contents for SD3010KB



























Reviews: