background image

11

English

 

Activating Progressive Scan
1.Ensure your TV supports
Progressive Mode
2.If there is a distorted picture on
the TV, wait 15 seconds for
automatic recover

Yes

No

G

 Press 

 to highlight { 

Yes

 } and press OK to confirm.

 

 The reconfirmation menu will appear on the TV

 

Confirm  again to use new setting
Revert  to  original setting in 14 seconds

Yes

No

H

   

Press 

 to highlight { 

Yes

 } and press OK to confirm.

 

 The setup is now completed and you can start 

enjoying the high quality picture.

 

To deactivate Progressive Scan       
manually:

A

  Wait for 15 seconds for the auto recovery. 

 
 OR

A

 Press 

OPEN/CLOSE 

ç

 on the DVD player to open 

the disc tray.

B

  Press number button 

"

 on the remote  control for a 

few seconds.

 

The blue DVD background screen appears.

 Tip:
 

-There are some progressive scan TVs and High-
Definition TVs that are not fully compatible with this 
unit, resulting in the unnatural picture when playing 
back a DVD VIDEO disc in the progressive scan 
mode. In such a case, turn off the progressive scan 
feature on both the DVD player and your TV.

 

Setting the language

 

You can change the On-Screen Display to your desired 
language where available.

 

On-Screen Display (OSD) Language

 

The On-screen language for the system menu will 
remain as you set it, regardless of various disc 
languages.

 

A

 Press 

SETUP.

B

 Press 

/

 to select { 

Language

 }

C

 Press 

 to highlight { 

OSD Language

 }, then press 

.

D

 Press 

/

 to select a language and press OK. 

 

Audio, Subtitle and DVD menu 
language

     You can choose your own preferred language or 

soundtrack from audio, subtitles and DVD menu 
languages. If the language selected is not available 
on the disc, the disc’s default language will be used 
instead.

 

A

 Press 

SETUP.

B

 Press 

 to select { 

Language

 }, then press 

.

C

 Press 

/

 to highlight one of the options below, 

then press 

.

 { 

Subtitle

 }

 

Select this to change the subtitle language.

 

Audio

}

 

Select this to change the disc soundtrack language.

 { 

DVD Menu

 }

 

Select this to change the language of the disc menu.

D

 Use 

/

 to select a language and press OK to  

confirm.

E

 Repeat 

steps 

C

 - 

D

 for other language settings.

 IMPORTANT!
 

-

DVD discs and players are designed with regional 

restrictions.  Before playing a disc, make sure the 
disc is for the same zone as your player.

 -If 

 'appears on the TV screen when a button is 

pressed, it means the function is not available on 
the current disc or at the current time.

 Playable 

discs

 

Using this DVD player, you can playback on the     
following discs. Some of these discs 

 

may be incompatible.

 DVD 

Video

 disc(Digital Versatile Disc)

 DVD+R/RW

 (DVD Recordable / 

 Rewritable)
 

DVD+R DL 

(Dual layer)

 

(Audio/Video format or MP3/

 JPEG 

files).

Getting Started (continued)/Playback from Disc

 Helpful 

hint

:     Press 

 to go back to previous menu item. 

                                 Press SETUP to exit the menu item.

Summary of Contents for SD-680KY
























Reviews: