background image

14

English

 

For Video CD, Audio CD

 

-Repeat Single (currently playing track)

 

-Repeat All (entire disc)

 -Off 

(cancel)

 

For MP3, JPEG, DivX

®

 

-Repeat Single (currently playing file)

 

-Repeat All (current folder)

 -Off 

(cancel)

 Tip:
 

-For VCD 2.0/SVCD discs, repeat playback is not 
possible if the PBC mode is switched on.

 

Repeating a section within a chapter/
track

 

You can repeat the playback of a specific segment 
within a chapter or track. To do this, you must mark 
the start and end of the segment you want. 

A

  While playing a disc, press A - B at your chosen 

starting point.

B

  Press A - B again at your chosen end point.

  

 The section will now repeat continuously.

C

  To exit the sequence, press A - B.

 

Viewing the disc playback information

 

You can view the disc information (such as current 
title/chapter/track number, total playing time or 
remaining time on the disc) without interrupting the 
disc playback.

A

  During playback, press DISPLAY repeatedly on the 

remote control.

  

The available disc information appears on the TV 

screen with the following sequence.

 Time
 

 Time  

00

03

33

 (DVD)

 

Title / Chapter

 

Title  1/1   Chapter      6/16

 (DVD)

 Audio
 

Audio 1/1  

  6Ch Eng

 

 (DVD)

 Subtitle
 

Subtitle      1/8     Eng

 (DVD)

 Angle
 

Angle 1/4

 (DVD)

 Time
 

 Time             00

03

33

 (VCD)

 Track
 

 

Track 1/15

  (VCD   PBC OFF)

 OR
 

 

 PBC On

  (VCD   PBC ON)

 

Title/Time/Chapter/Track selection

A

 Press 

T-SEARCH, 

then 

press 

/

 to select { Time} / 

{ Title } / { Chapter } or { Track }, press OK to access.

 
 For 

VCD

       

PBC OFF

 

     Track 

---

Playback Feature(continued)

 

     Track Time 

--:--:--

 

(desired time of the current track)

 

     Disc Time 

--:--:--

 

(desired time of the disc)

       

PBC ON

       

     Time 

--:--:--

 

(desired time of the current track)

 For 

DVD:

 

     Title 

---

 

     Chapter 

 ---

 

     Time 

--:--:--

 

(desired time of the disc)

B

  Use the number buttons ( 0-9 ) to input a desired 

number or time. (This function only apply to DVD/
VCD/CD/SVCD.)

C

  Press OK to confirm.

  

The playback skips to the chosen title/chapter/

track/time.

 

Angle

  

 When {Angle} information appears on the 

screen, press ANGLE button on the remote control 
repeatedly to switch to different angles.

  

Playback will go to the selected angle.

 

Special DVD Features

 

 

Playing a Title

 

A

 Press 

TITLE.

 

The disc title menu appears on the TV screen.

B

 Use 

/

/

/

 or number buttons (0-9) to select a 

play option.

C

   Press OK to confirm.

 

 

Changing the Audio Language

 

 For 

DVD

 

Press AUDIO repeatedly to select different audio 
languages.

 

Changing the Audio Channel

 For 

VCD

  

Press AUDIO to select the available audio channels 

provided by the disc (Left, Right, Mix, Stereo) 

Subtitles

 
 

Press SUBTITLE repeatedly to select different 

subtitle languages.

 

Special VCD and SVCD Features

 

 

For VCD with Playback Control ( PBC ) feature  
(version 2.0 only)

  

Press MENU to toggle between 

'

 PBC On 

'

 and       

'

 PBC Off 

'

.

 

If you select 

'

 PBC On 

'

, the disc menu ( if avail-

able ) will appear on the TV.

 

Use  the number buttons ( 0-9 ) to select a play 

option.

  

Press PREV 

 / NEXT 

 to go to the previous 

or next track.

            

Helpful hint

 

The operating features described here might not be possible for certain discs.

                                    Always refer to the instructions  supplied with the discs. 

Time 

00:03:33

Summary of Contents for SD-680KY
























Reviews: