manualshive.com logo in svg

Toshiba SD-520EKE, Service Manual

Share
Download
Toshiba SD-520EKE Service Manual Download Page 95

2-1-3. Tray Panel

<Tray Ejection>

1. Slide the slider (2) of the mechanism chassis assembly

(1) with a screwdriver, etc. in the arrow direction, so
that the tray (3) is ejected.

Note:

• Take care not to damage the pickup and other parts.

Fig. 2-1-16

<Tray Panel Removal>

1. Eject the tray (3).
2. Twist the tray panel (4) a little in the arrow A direction

with the tray (3) hold by hand to release two claws and
lift up the tray panel (4) in the arrow B direction, then
the tray panel (4) is removed. (Refer to Fig. 2-1-17.)

3. When mounting the tray panel (4), insert the tray panel

(4) along the grooves of the both sides of the tray (3)
until clicking.

Mechanism

chassis assembly (1)

Tray (3)

Front panel

Screw

driver

Slider (2)

Fig. 2-1-17

2-1-4. Front Panel and Tray

1. Remove the flexible cable (1).
2. Release four claws and remove the front panel (2).

3. Pull out the tray (3) towards you.

Fig. 2-1-18

Note:

• Insert the tray (3) with the front side of the pickup

mechanism assembly descended. (The slider positions
to the left side.)

• The gears are required to match their phases each

other. After setting the gear (4) as shown in the figure
“A”, insert the tray (3). When inserting a tray (3), push
the rack gear side shown by the arrow.

A

Tray
panel (4)

Tray (3)

Tray (3)

Tray
Panel (4)

Claw

Claw

B

A

B

Front
panel (2)

Tray (3)

Claws

Claw

Flexible cable (1)

Claw

Summary of Contents for SD-520EKE































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands