Toshiba SD-520EKE Service Manual Download Page 90

Page: 90 / 158

Screws (1)

Rear panel (2)

1-1-4. Tray

1. Pull out the tray (1) towards you until it stops.
2. Lift up claw A with a minus screwdriver, and pull out

the tray (1) towards you, then remove the tray (1).

Fig. 2-1-5

1-1-5. Rear Panel

1. Remove ten screws (1), then remove the rear panel (2).

Fig. 2-1-6

Tray
panel (2)

Tray (1)

Tray
Panel (2)

Claw

<Tray Panel Removal>

1. Eject the tray (1). (Refer to item 1-1-2.)
2. Twist the tray panel (2) a little in the arrow A direction

with the tray (1) hold by hand to release two claws and
lift up the tray panel (2) in the arrow B direction, then
the tray panel (2) is removed.

3. When mounting the tray panel (2), insert the tray panel

(2) along the grooves of the both sides of the tray (1)
until clicking.

Front
panel (2)

Claws

Claw

Flexible cable (1)

Claw

Fig. 2-1-3

1-1-3. Front Panel

1. Remove one flexible cable (1).

2. Release four claws, then remove the front panel (2).

Fig. 2-1-4

Mechanism
chassis assembly

Tray (1)

Pull out the tray (1)
toward you.

Tray (1)

Minus screwdriver

Claw A

Minus
screwdriver

Summary of Contents for SD-520EKE































































































































































Search results

Summary of Contents for SD-520EKE

Reviews:

Brands by name

Popular brands

Toshiba SD-520EKE, Service Manual

Search results

Summary of Contents for SD-520EKE

Reviews:

Brands by name

Popular brands