Toshiba SD-520EKE Service Manual Download Page 93

Page: 93 / 158

1-3. Mechanism Parts

1-3-1. Mechanism Chassis Assembly

Note:

• When removing the mechanism chassis assembly (3),

be sure to short-circuit the laser diode output land
before removing the connector and the flexible cables.

After replacing, open the land as it was after inserting
the connector and flexible cables.

1. Remove the front panel. (Refer to item 1-1-3.)

2. Remove three flexible cables (1).

3. Remove four screws (2), then remove the mechanism

chassis assembly (3).

Fig. 2-1-12

Tape (1)

Output-RGB PC board (5)

Screws (4)

Connector (2)

Connector (6)

Connector (2)

Wind the wire
several times.

Flexible
cable (3)

Tray

Connector (6)

Eject the tray slightly.

1-2-5. Output-RGB PC Board

1. Eject the tray slightly.

2. Peel off the tape (1).

3. Remove the connector (2) and the flexible cable (3).

4. Remove two screws (4), then remove the output-RGB

PC board (5).

Note:

• Wind the wire around the connector (6) several times

when mounting the connector (2).

Fig. 2-1-11

Screws (2)

Mechanism
chassis assembly (3)

Flexible
cables (1)

Pickup head

Laser diode
output lands

Pickup head

Laser diode
output lands

Pickup A

Pickup B

Summary of Contents for SD-520EKE































































































































































Search results

Summary of Contents for SD-520EKE

Reviews:

Brands by name

Popular brands

Toshiba SD-520EKE, Service Manual

Search results

Summary of Contents for SD-520EKE

Reviews:

Brands by name

Popular brands