manualshive.com logo in svg

Toshiba SD-520EKE, Service Manual

Share
Download
Toshiba SD-520EKE Service Manual Download Page 94

2. REPLACEMENT OF MECHANICAL PARTS (TYPE B)

<Mounting >

1. The spring for tray side pressure is inserted into the

portion “A”. (Refer to Fig. 2-1-14.)

2. By referring to Fig. 2-1-15, insert the spring normally

and mount the clamper stay.

Fig. 2-1-15

2-1. Cabinet Replacement

2-1-1. Top Cover

1. Remove seven screws (1), then remove the top cover

(2).

Fig. 2-1-13

2-1-2. Clamper Stay

<Removal>

1. Remove two screws (1).

2. Release two claws and remove the clamper stay (2).

Fig. 2-1-14

Screw (1)

Top cover (2)

Screws (1)

Screw (1)

Clamper stay (2)

Claw

Spring

Clamper stay (2)

Screws (1)

Clamper
stay (2)

Claw

Claws

A

OK

Tray

NG

Spring

Mechanism
chassis assembly

NG

This part should be touched
to the left side of the tray.

OK

NG

Press down by finger
unitil fix the clamper assembly

No floating

Floating NG

Summary of Contents for SD-520EKE































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands