background image

56

JPEG Interval

You can continuously playback all JPEG files
automatically.
After the selection below, the disc will start playback on
which JPEG files have been recorded.

Off:

Plays back one file at a time.

5 Seconds:

Plays back images in the form of a slide show at
5 second intervals.

10 Seconds:

Plays back images in the form of a slide show at
10 second intervals.

15 Seconds:

Plays back images in the form of a slide show at
15 second intervals.

Picture Mode

There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames per
second). Make this selection according to the type of
content being viewed.

Auto:

Select this position normally.
The DVD player automatically detects
source content, film or video of
playback source, and converts that
signal in the progressive output format
in an appropriate method.

Film:

The DVD player converts film content
pictures in the progressive output
format appropriately. Suitable for
playback of film content pictures. The
progressive output feature will be most
effective under this selection.

Video:

The DVD player filters video signal,
and converts it in the progressive
output format appropriately.
Suitable for playback of video content
pictures.

Note:

Depending on the disc, pictures may be cut off or
doubled. In this case, select “Video”.

Display

On screen display can be switched on or off when you
press any buttons.

On:

On screen displays appear when you press
the buttons (factory setting).

Off:

On screen displays do not appear when you
press any buttons.

Screen Saver

The screen saver operates when you leave the unit
in DVD stop mode for approx. five minutes.
The screen will repeatedly get dark gradually and
back to normal.

On:

Screen Saver function is made effective.

Off:

Screen Saver function is invalidated.

Customizing the function settings

  2J50301A [EN] P54-58

3/22/06, 8:12 PM

56

Summary of Contents for SD-37VESE

































































Reviews: