27
VCR
8+4
VCR
VCR
Counter display
2
1
3
ZERO RETURN function
This function makes tape-rewinding
stop at the counter 00:00:00 position
automatically.
Notes:
• When you load a video cassette, the
display indication changes to "00:00".
• The counter display does not function
on non-recorded (blank) sections of the
tape. When you rewind, fast forward or
play tapes through blank sections, the
counter display stops.
Preparation
• Turn ON the TV and set to the video input mode.
• Press
VCR
to select the VCR mode. (The VCR indicator will light.)
Press
CALL
.
The counter display shows the
tape running time during play-
back or recording.
The Recorder will indicate REC
during recording.
Press
COUNTER RESET
at
the desired tape position. The
counter display will be reset to
the “00:00:00” position (e.g.
the beginning of recording).
Press
STOP
when playback or
recording is finished.
Press
ZERO RETURN
.
The tape will be rewinded or fast
forwarded and automatically
stop at the “00:00:00” position.
The CLOCK/COUNTER button
Press
CLOCK/COUNTER
during the playback. The clock and tape
counter alternate with each other in the display.
Note:
You can set the tape counter to 00:00:00 with
COUNTER RESET
anytime. Therefore, the counter display can also indicate 00:00:00,
even when the tape counter does not reach its beginning yet. Even
if the tape counter indicates 00:00:00, it can be rewinded. If the tape
was rewinded over the point of 00:00:00, the minus mark (–) appears
in the counter display. Although the tape counter seems to forward
when you press
REV
, in fact the tape is being rewinded. When the
tape reaches the beginning, the tape-rewinding stops
automatically.
CH 2
ZDF
12:00 SUN
B/G
00:36:25 SP
2J50301A [EN] P23-28
3/22/06, 8:11 PM
27
