17
3
Automatic TV station presetting
2
1
4
Your DVD/VCR has one built-in tuner
to receive the broadcast. Before you
record one TV-Broadcast, you must
set and preset the whole of the broad-
casts. This DVD/VCR can preset up
to 80 broadcast.
Automatic station presetting
All stations will preset in sequence available in your area.
Preparation:
• Turn ON the TV and set to the video input mode.
• Press
VCR
to select the VCR mode. (The VCR indicator will light.)
Press
VCR MENU
.
Press
or
to select
CHANNEL SETUP. Then
press
ENTER
.
Press
or
to select AUTO
TUNING.
Press
ENTER
.
The DVD/VCR will begin searching and setting with early stored
channel, the number is increased by one into memory all the broad-
casting channels available in your area (VHF-L, VHF-H, UHF). While
setting channels, AUTO TUNING appears. When the setting
finished, the CHANNEL MAPPING menu will appear.
Press
VCR MENU
repeatedly until the TV picture appears on
the screen.
Note:
To cancel skipping, select the skipped channel using
number
buttons (0-9)
, then press
CANCEL
. The channel No. does not blink
any longer, and the channel No. now can be selected again using
CH
+/–
.
To skip a channel position
Unwanted channels can be skipped so that they cannot be called up
by pressing
CH
+/–
. Select the 29, then press
CANCEL
. This channel’s
number will be flashing. That way you can cancel further channel
one after the other.
Notes:
• TV reception interference or power fail-
ure may result in Automatic station pre-
setting malfunctions. In such a case
repeat the setting procedure from the
beginning.
However, you cannot receive the nec-
essary broadcast yet, try to preset the
broadcast manually. (See page 21.)
• When the unit is in the auxiliary input
mode, you cannot preset channels.
2J50301A [EN] P17-22
3/22/06, 10:28 PM
17
