(
)
*
'
Cannot specify the AB
segment.
Digital Re-master does
not work.
The unit malfunctions
when connected to other
equipment.
Cannot hear the remote
control’s operation tone.
The remote control does
not work properly.
Cannot recharge.
The AC adaptor
becomes warm during
recharging.
The batteries are taking
a long time to recharge.
Play time is short after
recharging.
The battery indicator fails
to appear or is incorrect.
No play.
No sound or there is a
lot of noise.
Play doesn’t resume from
the last point stopped.
Play doesn’t start from
the first track.
The unit stops working.
Cannot search through tracks.
Cannot skip albums.
Cannot change the
Digital Re-master mode.
PY
P
PC
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, see “Product information”
on
page 3
for assistance.
Troubleshooting guide
1
The model number and serial number of
this product can be found on either the
back or the bottom of the unit.
Please note them in the space provided
below and keep for future reference.
MODEL NUMBER
SERIAL NUMBER
This manual was printed with soy based ink.
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.ca
C
2003 Matsushita Electric Industrial Co., Ltd.
Printed in Japan
RQT7184-P
F1103TR0
Display
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094
http://www.panasonic.com
Panasonic Sales Company,
Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985
p
Portable CD Player
Operating Instructions
SL-SX430
SL-SX431C
Dear Customer
Thank you for purchasing this product.
Before connecting, operating or adjusting
this product, please read these instructions
completely. Please keep this manual for
future reference.
≥
The HOLD function is on
.
Release HOLD (
➪
page 5).
≥
The batteries may have run empty (
➪
page 5).
(If play is extremely short even after fully recharging the
batteries, the batteries may have exceeded their life.
Rechargeable batteries can be recharged approximately 300
times.)
≥
The disc isn’t correctly set.
≥
The disc is scratched or dirty. (Tracks skipped.)
≥
There is moisture on the lens. Wait for about an hour and then
try again.
≥
The lens is dirty: clean it with a blower (recommended
product:
SZZP1038C
). If the lens gets marked with
fingerprints, gently wipe them off with a cotton swab.
≥
The unit may not read MP3 correctly if it is shaken while it is
reading the files.
≥
Play of a multi-session disc may not be possible if there is a
blank data segment between sessions.
≥
If there is large JPEG data etc. within a MP3 file, sound may
become muted and play may not be possible.
≥
If you try playing a CD that contains CD-ROM format data and
normal audio data (CD-DA), output from one of the above
may become silent, and play may not be possible.
≥
Ensure the plugs are inserted firmly.
≥
Wipe the plugs clean with a clean cloth.
≥
Noise may occur when playing MP3 if recording quality is poor.
≥
The elapsed playing time disappears and sound is interrupted if
bumps continue repeatedly.
≥
Separate this unit from mobile telephones.
≥
This doesn’t work if you change discs.
≥
This doesn’t work during random play.
≥
It may not work correctly under some conditions.
≥
Random play modes may be on (
➪
page 6).
≥
Play resumes from the last point stopped.
Disconnect then reconnect all power sources
(batteries and AC adaptor).
You cannot search through MP3 files.
You cannot skip between the first and last albums during play.
If [
:
]or [
9
] is pressed before [MEMO] you cannot
change the Digital Re-master mode.
The HOLD function is on
.
Release HOLD (
➪
page 5).
≥
You haven’t inserted a disc or it isn’t inserted correctly.
≥
You have inserted a disc this unit cannot play.
The disc lid is open.
The program already contains 20 tracks.
Reading MP3 files.
You may not be able to specify segment A or B at the end of
disc.
Depending on the type of MP3 disc recording, the effect may
not appear.
Be sure to connect other equipment through the remote
control. Speakers connected directly to the unit should have an
impedance of 1 k
≠
or less.
The operation tone may be off (
➪
page 6).
Use only the included remote control to operate this unit.
≥
You aren’t using the special rechargeable batteries (
➪
page 5).
≥
You must insert two batteries before you can recharge them.
≥
The unit must be off before you can recharge.
This is normal.
The batteries may take a maximum of 4 hours to recharge
under some conditions.
≥
This may occur after the first time you recharge the batteries or haven’t used
them for a long time. Play time should be restored after a few recharges.
≥
The batteries can go flat if you leave the AC adaptor
connected after recharging is complete.
≥
The indicator does not appear when the AC adaptor is connected.
≥
The indicator does not appear correctly under some conditions.
RQT7184-P 03.11.14 6:02 PM ページ 1
