Toshiba SD-170EKB, Owner'S Manual

Page: 8 / 24

E
ng
lis
h
Connecting to television
I MPORTANT!
– You only need to make one video connection
from the following options, depending on the
capabilities of your television.
– Connect the DVD player directly to the televi -
sion.
Using SCART socket
MAINS
A
Use the scart cable to connect the DVD SCART OUT
to the corresponding scart input socket on the TV
( cable not supplied).
If your DVD player will not be connected to a Stereo
System or AV Receiver to hear better sound, scart is
enough for both audio and video connections.
Using Composite Video Jack(CVBS)
MAINS
A
Use the composite video cable (yellow) to connect
the DVD player
'
s VIDEO OUT(CVBS) jack to the
video input jack(or labelled as A/V in,Video In or
Composite) on the TV(cable supplied).
To hear the sound of this DVD player through your
TV, use the audio cables(white/red)to connect AU -
DIO OUT(L/R)jacks of the DVD player to correspond -
ing AUDIO IN jacks on the TV(cable supplied).
Using Component Video Jacks(Y P
B
P
R
)
MAINS
IMPORTANT!
-The progressive scan video quality is only pos -
sible when using Y P
B
P
R
and a progressive scan
TV is required.
A
Use the component video cables (red/blue/green) to
connect the DVD player ' s Y P
B
P
R
jacks to the cor-
responding Component video input jacks (or labelled
as Y P
b
P
r
) on the TV (cable not supplied).
B
Use the audio cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to the correspond -
ing AUDIO IN jacks on the TV (cable not supplied).
C
Proceed to page 11 for detailed Progressive Scan set
up.
Using a RF modulator
MAINS
I MPORTANT!
-If your TV only has a single Antenna In jack (or
Connections
Helpful hint: before making or changing any connections, make sure that all the devices are
disconnected from the power outlet.