manualshive.com logo in svg

Toshiba Satellite Radius 14 L40DW-C, User Manual

Share
Download
Toshiba Satellite Radius 14 L40DW-C User Manual Download Page 31

The application allows you to choose from a variety of different media
onto which the recovery image can be copied including disc media
and USB Flash Memory.

Some of the disc media might not be compatible with the optical disc
drive connected to your computer. You should therefore verify that the
optical disc drive supports the blank media you have chosen before
proceeding.
USB Flash Memory will be formatted and all the data in the USB Flash
Memory will be lost when proceeding.

2.

Turn on your computer and allow it to load the Windows operating
system from the Hard Disk Drive as normal.

3.

Insert the first blank disc into the external optical disc drive tray, or
insert the USB Flash Memory into one available USB port.

4.

Click 

Recovery Media Creator

 under 

TOSHIBA

 group in 

All apps

.

5.

After Recovery Media Creator starts, select the type of media and the
title you wish to copy, and then click the 

Create

 button.

Make sure that you create recovery media by using Recovery Media 
Creator instead of the recovery drive creating option in Windows system.
Otherwise, Recovery Media Creator will not work and TOSHIBA HDD 
Recovery option in TOSHIBA Maintenance Utility will not exist if you
restore the computer from the recovery media you created by options in
Windows system.

Restoring the pre-installed software from your created

Recovery Media

If the pre-installed files are damaged, you are able to use the Recovery
Media you have created to restore the computer to the state it was in when
you originally received it. To perform this restoration, do the following:

When you reinstall the Windows operating system, the hard disk will
be reformatted and all data will be lost.
Make sure to use the default Boot Mode option in TOSHIBA Setup
Utility before restoring.

1.

Launch the TOSHIBA Setup Utility.
Refer to the section for further information.

2.

In the TOSHIBA Setup Utility screen, select Advanced -> System 
Configuration -> Boot Mode.
Note: Please skip the following contents if you cannot find the Boot
Mode option in your system.

User's Manual

2-15

Summary of Contents for Satellite Radius 14 L40DW-C






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands