Toshiba Satellite R20 User Manual Download

Page: 177 / 259

User’s Manual

7-9

HW Setup & BIOS Setup

Ending the BIOS Setup Program Halfway

The configuration settings can be terminated halfway without saving any of
the changes made.

1. Press the

Esc

key.

The "

Exit without saving? (Y/N)

" message is displayed.

2. Press the

key.

The BIOS setup program will end.

Core Multi - Processing

The Core Multi-Processing sets the CPU operating mode.

Enabled is Dual Core mode.

Disabled is Single Core mode.

Virtualization Technology

Virtualization Technology sets enable or disable of the Intel Virtualization
Technology installed in the CPU.

Intel Virtualization Technology is the technique that allows one machine to
operate as multiple virtual machines.

The Disabled command does not allow use of the Intel Virtualization
Technology.

The Enabled command allows use of the Intel Virtualization Technology.

Enhanced C-States

This feature enables or disables the Enhanced C-States.

This option is displayed only on models with an Intel

Core

Duo processor.

Enabled

Enables Core Multi - Processing functions
(Default).

Disabled

Disables Core Multi - Processing functions.

The Virtualization Technology is supported with some models.

Enabled

Enables Virtualization Technology.

Disabled

Disables Virtualization Technology (Default).

This option is displayed only on models with an Intel

Core

Duo

processor and Intel

Core

Solo processor.

Enabled

This lowers the power consumption (Default).

Disabled

This does not lower the power consumption.

Summary of Contents for Satellite R20




































































































































































































































































Search results

Summary of Contents for Satellite R20

Reviews:

Related manuals for Satellite R20

Brands by name

Popular brands

Toshiba Satellite R20, User Manual

Search results

Summary of Contents for Satellite R20

Reviews:

Related manuals for Satellite R20

Brands by name

Popular brands