Toshiba Satellite Pro A50-E Series User Manual Download | Manualshive

Page: 69 / 178

background image

Real-Time Clock (RTC) battery

The Real-Time Clock (RTC) battery provides power for the internal real-
time clock and calendar function and also maintains the system
configuration while the computer is turned off. If the RTC battery becomes
completely discharged, the system will lose this information and the real-
time clock and calendar will stop working.
You can change the Real-Time Clock settings in the TOSHIBA Setup
Utility. Refer to

Real Time Clock

for further information.

The RTC battery of the computer must be replaced only by your dealer or
by a TOSHIBA service representative. The battery can explode if not
properly replaced, used, handled, or disposed of. Dispose of the battery as
required by local ordinances or regulations.

Care and use of the battery pack

This section provides the important safety precautions in order to handle
your battery pack properly.
Refer to the enclosed

Instruction Manual for Safety and Comfort

for

detailed precautions and handling instructions.

Make sure the battery is securely installed in the computer before
attempting to charge the battery pack. Improper installation might
generate smoke or fire, or cause the battery pack to rupture.
Keep the battery pack out of reach of infants and children. It can
cause injury.

The battery pack can explode if not replaced, used, handled or
disposed of properly. Dispose of the battery as required by local
ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
Charge the battery pack only in an ambient temperature from 5
through 35 degrees Celsius. Otherwise, the electrolyte solution might
leak, battery pack performance might deteriorate, and the battery life
might be shortened.
Never install or remove the battery pack without first turning off the
power and disconnecting the AC adaptor. Never remove the battery
pack while the computer is in Sleep Mode, as data might be lost.

Never remove the battery pack while the Wake-up on LAN function is
enabled, as data will be lost. Before you remove a battery pack, disable the
Wake-up on LAN function.

User's Manual

4-16

«
...
67
68
69
70
71
...
»

Summary of Contents for Satellite Pro A50-E Series



















































































































































































Reviews:

No comments

Related manuals for Satellite Pro A50-E Series

Brand: Olivetti Pages: 254

TRS-80 Color Computer 2

Brand: Radio Shack Pages: 44

Brand: Worx Professional Pages: 106

ThinkCentre 8105

Brand: IBM Pages: 38

EBOX-3310MX-S4C

Brand: DMP Electronics Pages: 41

Brand: Vivo Pages: 5

Brand: IBM Pages: 52

Brand: Seeed Pages: 9

Brand: Silicon Graphics Pages: 228

Brand: Sinocan Pages: 41

MPC-2070 Series

Brand: Moxa Technologies Pages: 10

MPC-2101 Series

Brand: Moxa Technologies Pages: 51

DA-681-I-SP-XPE

Brand: Moxa Technologies Pages: 2

Brand: Moxa Technologies Pages: 73

Brand: Alpha Microsystems Pages: 42

Brand: National Instruments Pages: 37

Brand: ClearCube Pages: 4

Brand: Shuttle Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands