background image

Function Key

The function keys (F1 ~ F12) are the twelve keys at the top of your
keyboard.

You can configure the function keys’ mode as "Special function mode" or
"Standard F1-F12 mode" by clicking 

Desktop -> Desktop Assist -> Tools 

& Utilities -> System Settings -> Keyboard

.

"Special function mode" allows you to use special functions without
pressing the 

FN

 key.

Special
function mode

Standard F1-
F12 mode

Function

F1

FN + F1

Launches the help file supplied with
the software.

F2

FN + F2

Decreases the computer's display
panel brightness in individual steps.

F3

FN + F3

Increases the computer's display
panel brightness in individual steps.

F4

FN + F4

Changes the active display device.
To use a simultaneous mode, you
must set the resolution of the internal
display panel to match the resolution
of the external display device.

F5

FN + F5

Enables or disables the Touch Pad.

F6

FN + F6

Moves media backward.

F7

FN + F7

Plays or pauses media playback.

F8

FN + F8

Moves media forward.

F9

FN + F9

Decreases the computer's volume.

F10

FN + F10

Increases the computer's volume.

F11

FN + F11

Turns the sound on or off.

F12

FN + F12

Turns the Airplane mode on or off.

FN + 1

FN + 1

Reduces the icon size on the desktop
or the font sizes within one of the
supported application windows.

FN + 2

FN + 2

Enlarges the icon size on the desktop
or the font sizes within one of the
supported application windows.

User's Manual

4-4

Summary of Contents for Satellite NB10-A



























































































































Reviews: