7.
Lift the memory protection sheet. Align the notch of the memory
module with that of the memory slot and gently insert the module into
the slot at about a 30 degree angle before holding it down until the
latches on either side snap into place.
Figure 4-8 Seating the memory module
1
1. Notch
Product appearance depends on the model you purchased.
Never allow metal objects, such as screws, staples and paper clips, to
enter the computer. Foreign metal objects can create a short circuit,
which can cause computer damage and fire, possibly resulting in
serious injury.
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
Align the grooves along the edges of the memory module with the
locking tabs on the connector and insert the module into the connector
firmly - if you find it difficult to install the memory module, gently prise
the locking tabs outwards using the tip of your finger.
Please also ensure that you hold the memory module along its left and
right hand edges - the edges with the grooves in.
8.
Seat the memory module cover in place and secure it with the screw.
9.
Install the battery pack.
10. Turn your computer over.
11. Turn the computer on and make sure the installed memory is
recognized - to confirmed it, click
Desktop -> Desktop Assist ->
Control Panel -> System and Security -> System
.
Memory media
The computer is equipped with a memory media slot that can
accommodate some kinds of memory media with various memory
User's Manual
4-16
