Toshiba Satellite M70 User Manual Download Page 113

Page: 113 / 176

User’s Manual

6-11

Power and Power-Up Modes

6. Unlock the Battery Pack Lock.

Removing the battery pack-1

7. Slide the battery pack latch to the left, then pull the battery out of the

battery bay.

Removing the battery pack-2

Installing the battery pack

To install a battery pack, follow the steps below.

1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Hold the battery pack so that the label faces down and the connectors

on the battery face the connectors on the computer.

The battery pack is a lithium ion battery, which can explode if not properly

replaced, used, handled or disposed of. Dispose of the battery as required

by local ordinances or regulations. Use only batteries recommended by

TOSHIBA as replacements.

Summary of Contents for Satellite M70

















































































































































































Search results

Summary of Contents for Satellite M70

Reviews:

Related manuals for Satellite M70

Brands by name

Popular brands

Toshiba Satellite M70, User Manual

Search results

Summary of Contents for Satellite M70

Reviews:

Related manuals for Satellite M70

Brands by name

Popular brands