Toshiba Satellite M70 User Manual Download Page 125

Page: 125 / 176

User’s Manual

8-5

Optional Devices

Removing an ExpressCard

1. Click the

Safety Remove Hardware

icon on the Task Bar.

2. Click the ExpressCard you want to remove.
3. Press the ExpressCard once to extend it.
4. Grasp the extended ExpressCard, and remove it.

Removing an ExpressCard

SD/MMC/MS/MS Pro/xD Memory cards

The computer is equipped with a multiple digital media card slot that can

accommodate SD/MMC/MS/MS Pro/xD memory cards. These memory

cards let you easily transfer data from devices, such as digital cameras and

Personal Digital Assistants, which use flash-memory.

Card Type

Capacities

8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, 1GB

MMC

8MB, 16MB, 32MB, 64MB, 128MB, 256MB

MS Pro

256MB, 512MB, 1GB

8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, 1GB

Keep foreign objects out of the memory card slot. A pin or similar object

can damage the computer’s circuitry.

Do not format a memory card with Windows

as it might result in that card

not being able to be used with some peripheral devices.

Summary of Contents for Satellite M70

















































































































































































Search results

Summary of Contents for Satellite M70

Reviews:

Related manuals for Satellite M70

Brands by name

Popular brands

Toshiba Satellite M70, User Manual

Search results

Summary of Contents for Satellite M70

Reviews:

Related manuals for Satellite M70

Brands by name

Popular brands