Toshiba Satellite M70 User Manual Download Page 58

Page: 58 / 176

3-6

User’s Manual

Getting Started

Opening the display

The display panel can be rotated in a wide range of angles for optimal

viewing.
1. Push the display latch on the front of the computer.

Opening the display

2. Lift the panel up and adjust it to the best viewing angle for you.

Turning on the power

This section describes how to turn on the power.

1. If an optional USB floppy disk drive is connected, make sure the drive is

empty. If a disk is in the drive, press the eject button to remove it.

2. Open the display panel.
3. Press the computer’s power button and then release it.

Turning on the power

Use reasonable care when opening and closing the display panel.

Opening it vigorously or slamming it shut could damage the computer.

After you turn on the power for the first time, do not turn it off until you have

set up the operating system. Refer to the section

Starting up for the first

time

in this chapter.

Summary of Contents for Satellite M70

















































































































































































Search results

Summary of Contents for Satellite M70

Reviews:

Related manuals for Satellite M70

Brands by name

Popular brands

Toshiba Satellite M70, User Manual

Search results

Summary of Contents for Satellite M70

Reviews:

Related manuals for Satellite M70

Brands by name

Popular brands