Replacement Procedures
Satellite L830
Maintenance Manual (960-Q08)
12
4.4 Optical Disk Drive
NOTE: Do not apply excessive force to the top of an optical disk drive.
Do not touch the shaded portion of the figure below, when the drive is removed
or installed.
Remove an optical disk drive
The following describe the procedure for removing an optical disk drive. (See Figure 4-4-1)
1.
Turn off the computer and remove the battery.
2.
After remove the Ram Door, release the following screws securing an optical dis
drive.
•
M2.0
×
2.0-I-NI(NYLOK) Steel Screw
x1
3.
Disconnect an optical disk drive toward the arrow direction from the ODD connector
on the system board.
4.
Loose the ODD bracket to from an optical disk drive (See Figure 4-4-2)
M2.0
×
3.0 -I(BKAG)(NYLOK) Screw
x2
5. Disassemble the ODD bezel (see figure 4-4-3)
Figure 4-4-1 Disconnect an optical disk drive
M2.0
×
2.0 Screw