Replacement Procedures
Satellite L830
Maintenance Manual (960-Q08)
50
3.
Set the TP button module on TP Bracket firmly. Make sure the guide pin (on TP
Bracket) insert into guide hole (on TP button module) properly.
4.
Confirm the anti- “TP Button mis-action” structure also assemble properly
5.
Secure the TP button module with the following screws.
•
M2.0
×
2.5-I (BNI)(NYLOK) D7 T0.3 IRON Screw
x3
Figure 4-16-6 Secure the TP button module with screws
Figure 4-16-7 install touchpad module
6.
Connect the TPB-TP FFC cable on the TP side.
7.
Connect the TPB-MB FFC cable on the MB side.
Note:
Touchpad bracket could be reused after disassemble
Guiding Structure
anti- “TP Button mis-
action” structure