Toshiba SATELLITE 2750 Series, User Manual

Page: 94 / 176

User's Manual TSETUP and Passwords 7-15
Version
1
Last Saved on 30/04/00 19:48
Satellite 2750/2770 User's Manual – Satellite 2750 UK.doc – ENGLISH – Printed on 30/04/00 as
IM_275UK
When the Parallel Port Mode (see settings below) is set to ECP, the DMA
channel can also be set to 1 or 3. The default is 3.
LPT setting I/O address Interrupt level DMA Channel
LPT 1 378H 7 3
(Default)
LPT 2 278H 5 3
LPT 3 3BCH 7 3
Not Used
(Disables port)
Others
(Other settings made automatically by
plug-and-play operating systems)
PCI bus
It is for information only and cannot be changed. It appears only
in TSETUP.
PCI BUS = IRQ11
PC Card
This option lets you set the PC Card Controller mode.
Auto-Selected
Use this setting for all PC Cards if you are using
a plug-and-play operating system. (Default)
CardBus/16bit
If the card does not work properly with the Auto-
Selected setting, use this setting for CardBus PC
cards.
PCIC Compatible
If the card does not work properly with the Auto-
Selected and CardBus/16bit settings, use this
setting for 16-bit PC Cards.
When Device Config is set to Setup by OS, you must set the PC Card to
Auto-Selected.
Drives I/O
This item displays the installed hard disk drives and DVD-ROM drives:
HDD, CD-ROM. It appears only in TSETUP.