Toshiba SATELLITE 2750 Series User Manual Download Page 49

Page: 49 / 176

4-2 Operating Basics

User's Manual

Satellite 2750/2770 User's Manual – Satellite 2750 UK.doc – ENGLISH – Printed on 30/04/00 as

IM_275UK

AccuPoint II precautions

Under certain conditions, the on-screen pointer may travel contrary to
AccuPoint II operation or an error message may appear. For example, if

You touch the AccuPoint II during power-up.

You apply constant, soft pressure to the AccuPoint II.

There is a sudden temperature change.

Strong stress is applied to the AccuPoint II.

If an error message appears, reboot the computer. If an error message does
not appear, wait a moment for the pointer to stop, then continue operation.

Replacing the cap

The AccuPoint II cap is an expendable item that should be replaced after
prolonged use. There are spare AccuPoint II caps supplied with the
computer.

To remove the AccuPoint II cap, firmly grasp the cap and pull it straight
up.

ACCUPOINT II CAP

PEG

Removing the AccuPoint II cap

Position a new cap on the peg and press it into place.

The peg is square, so be careful to align the cap’s square hole with the peg.

Summary of Contents for SATELLITE 2750 Series

















































































































































































Search results

Summary of Contents for SATELLITE 2750 Series

Reviews:

Brands by name

Popular brands

Toshiba SATELLITE 2750 Series, User Manual

Search results

Summary of Contents for SATELLITE 2750 Series

Reviews:

Brands by name

Popular brands