manualshive.com logo in svg

Toshiba SATELLITE 2750 Series, User Manual

Share
Download
Toshiba SATELLITE 2750 Series User Manual Download Page 42

3-6  Getting Started

User's Manual

Satellite 2750/2770 User's Manual  – Satellite 2750 UK.doc – ENGLISH – Printed on 30/04/00 as 

IM_275UK

Opening the display

The display panel can be rotated in a wide range of angles for
optimal viewing.

1. 

Slide the display latch on the front of the computer to the right to
unlatch the display panel.

2. 

Lift the panel up and adjust it to the best viewing angle for you.

 Use reasonable care when opening and closing the display panel.
Opening it vigorously or slamming it shut could damage the computer.

 

 Opening the display

Turning on the power

This section describes how to turn on the power.

 After you turn on the power for the first time, do not turn it off until you
have set up the operating system.

1. 

Make sure the diskette drive is empty. If a diskette is in the drive, press
the eject button and remove the diskette.

2. 

Slide the power button lock to the left to unlock the power button.

3. 

Press and hold the computer’s power button for two or three seconds.

 

 Turning on the power

 

 

Summary of Contents for SATELLITE 2750 Series

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands