Toshiba SATELLITE 2750 Series User Manual Download Page 75

Page: 75 / 176

6-10 Power and Power-Up Modes

User's Manual

Satellite 2750/2770 User's Manual – Satellite 2750 UK.doc – ENGLISH – Printed on 30/04/00 as

IM_275UK

Installing the battery pack

To install a battery, follow the steps below.

The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
Toshiba as replacements.

Turn the computer’s power off.

Disconnect all cables connected to the computer.

Hold the battery so that the label faces down and the connectors on
the battery face the connectors on the computer.

Lay the battery in the cover and make sure it is secured by the latches.

Inserting the battery pack

Summary of Contents for SATELLITE 2750 Series

















































































































































































Search results

Summary of Contents for SATELLITE 2750 Series

Reviews:

Related manuals for SATELLITE 2750 Series

Brands by name

Popular brands

Toshiba SATELLITE 2750 Series, User Manual

Search results

Summary of Contents for SATELLITE 2750 Series

Reviews:

Related manuals for SATELLITE 2750 Series

Brands by name

Popular brands