Toshiba Satellite 1410 Series User Manual Download

Page: 32 / 266

Finding Your Way Around

Front with the display open

5.375 x 8.375 ver 2.4.0

The stereo

speakers

let you hear sounds, such as system

alarms associated with your software, and music from DVD-
ROMs and audio CDs.

The

function keys

, when used with the

key, activate

several different system functions. For more information, see

“Hot Keys” on page 231

The

TouchPad

enables you to move the cursor with the

stroke of a finger. For more information, see

“Using the

TouchPad” on page 65

The built-in

LCD sensor

causes your computer to go into

Hibernation mode when the panel is closed, if set to perform
this function. For more information, see

“Important

information on your computer’s built-in LCD sensor” on
page 64

The lights on the

system indicator panel

provide

information about various system functions. For a description
of these lights, see

“System indicator panel” on page 34

The

volume control dial

lets you adjust the loudness of the

system speakers.

The 3.5 mm

headphone

out

lets you connect stereo

headphones or other audio-output devices, such as external
speakers. Connecting other devices automatically disables the
internal speakers.

The 3.5 mm

microphone in jack

lets you connect an external

monaural microphone.

The

primary

control button

located below the TouchPad,

acts like the primary button on a mouse.

The

secondary

control button

, located below the TouchPad,

acts like the secondary button on a mouse.

The

CD/DVD control buttons

allow you to play audio CDs

when the computer is turned off. You can also use them to
play CDs and DVDs with the computer turned on. For a
description of these controls, see

“CD/DVD control buttons”

on page 35

Summary of Contents for Satellite 1410 Series











































































































































































































































































Search results

Summary of Contents for Satellite 1410 Series

Reviews:

Related manuals for Satellite 1410 Series

Brands by name

Popular brands

Toshiba Satellite 1410 Series, User Manual

Search results

Summary of Contents for Satellite 1410 Series

Reviews:

Related manuals for Satellite 1410 Series

Brands by name

Popular brands