Toshiba Satellite 1410 Series User Manual Download

Page: 214 / 266

214

If Something Goes Wrong

Resolving a hardware conflict

5.375 x 8.375 ver 2.4.0

Display problems

Here are some typical display problems and their solutions:

The display is blank.

Display Auto Off may have gone into effect. Press any key to
activate the screen.

You may have activated the instant password feature by
pressing

and

simultaneously. If you have registered a

password, press the

Enter key

, type the password and press

Enter

If no password is registered, press

Enter

. The screen reactivates

and allows you to continue working.

The following display options are readily available on your
system:

❖

built-in display panel only

❖

built-in display panel and external monitor
simultaneously

❖

external monitor only

❖

external video device only (composite port)

To open the display options window, press

and

simultaneously. To choose the desired option, hold down

and press

repeatedly until your choice is selected.

To decrease or increase screen brightness you can use the hot
keys

Fn + F6

Fn + F7

If you are using an external monitor:

❖

Check that the monitor is turned on.

❖

Check that the monitor’s power cable is firmly plugged
into a working power outlet.

❖

Check that the cable connecting the external monitor to
the computer is firmly attached.

❖

Try adjusting the contrast and brightness controls on the
external monitor.

Summary of Contents for Satellite 1410 Series











































































































































































































































































Search results

Summary of Contents for Satellite 1410 Series

Reviews:

Related manuals for Satellite 1410 Series

Brands by name

Popular brands

Toshiba Satellite 1410 Series, User Manual

Search results

Summary of Contents for Satellite 1410 Series

Reviews:

Related manuals for Satellite 1410 Series

Brands by name

Popular brands