Toshiba Satellite 1410 Series User Manual Download

Page: 184 / 266

184

Exploring Your Options

Using PC Cards

5.375 x 8.375 ver 2.4.0

Removing PC Cards

Click the

Safely Remove Hardware

icon on the System

tray.

Click

Safely remove xxxx

, where

xxxx

is the identifier

for your PC Card.

The operating system advises you that you may safely
remove the card.

Press the PC Card eject button next to the PC Card slot in
use.

Ejecting a PC Card

Remove the PC Card and store it properly.

Hot swapping

One of the great things about PC Cards is that you can
replace one PC Card with another while the computer is on.
This is called “hot swapping.”

Hot swapping precautions

Although you can insert a PC Card at any time, to avoid data
loss never remove a card while it is in use. For example:

❖

Never remove an ATA card while the system is accessing
it.

Summary of Contents for Satellite 1410 Series











































































































































































































































































Search results

Summary of Contents for Satellite 1410 Series

Reviews:

Related manuals for Satellite 1410 Series

Brands by name

Popular brands

Toshiba Satellite 1410 Series, User Manual

Search results

Summary of Contents for Satellite 1410 Series

Reviews:

Related manuals for Satellite 1410 Series

Brands by name

Popular brands