IN/OUT
MEDIA REC.
TV
SAT
7
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
Media Recorder
Decoder*
CABLE HOLDER
FIXING STRAP
HDMI INPUT
SOCKETS
SCART 2 (EXT2)
COMPONENT VIDEO (EXT3)
SCART 1 (EXT1)
POWER SWITCH
(Full Power Down
Option – see page 12)
*
a decoder could
be Digital Satellite
or any other
compatible decoder
.
The cable holder
can be used for aerial,
media recorder and
audio cables. Do not
use as a handle and
remove all cables
before moving the
television.
DIGITAL AUDIO OUTPUT (DTV MODE ONLY)
NOTE:
It is recommended that an HDMI cable with the HDMI
logo ( ) is used. When connecting other equipment to
this television if the connection is capable of 1080p and/or
supports Deep Color™ a Category 2 cable will be required.
Conventional HDMI/DVI cable may not work properly with this
mode. It is recommended that DVI cable or DVI/HDMI adapter
with cable is less than 2m long.
PLEASE NOTE:
Although this television is able to connect to
HDMI equipment it is possible that some equipment may not
operate correctly.
A wide variety of external equipment can be connected
to the back of the television, therefore the relevant
owners manuals for
all
additional equipment
must
be
referred to.
We recommend
SCART 1
for a decoder and
SCART 2
for a
media recorder. If connecting S-VIDEO equipment, set the
INPUT
for
EXT2
.
See page 39.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment, press
B
to select between
DTV
,
EXT1
,
EXT2
,
EXT3C
,
HDMI1
,
HDMI2
,
HDMI3
,
PC
or
ATV
.
Aerial cables:
Connect the aerial to the socket on the rear of the television. If
you use a decoder* and/or a media recorder it is essential that
the aerial cable is connected through the decoder and/or
through the media recorder to the television.
SCART leads:
Connect the video recorder
IN/OUT
socket to the television.
Connect the decoder
TV
socket to the television. Connect the
media recorder
SAT
socket to the decoder
MEDIA REC.
socket.
Before running
Auto tuning
put your decoder and media
recorder to
Standby
.
The phono sockets alongside the COMPONENT VIDEO INPUT
sockets will accept L and R audio signals.
In addition there is a fixed external audio ouput which enables
the connection of a suitable Hi-Fi unit.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: this output is always
active.
HDMI (High-Definition Multimedia Interface) is for use with a
DVD, decoder or electrical equipment with digital audio and
video output.
REGZA-LINK will only work through HDMI when using other
Toshiba equipment with REGZA-LINK capability.
HDMI, the HDMI logo, High-Definition Multimedia Interface and
Deep Color are trademarks or registered trademarks of HDMI
Licensing, LLC.
g
p
g
