Toshiba Regza 42XV545U, Owner'S Manual

Page: 65 / 82

65
XV545U (E/F) Web 177.8:228.6
Chapter 7: Using the TV’s advanced features
Selecting the cinema mode
(480i and 1080i signals)
When you view a DVD (3:2 pulldown processed) from a
DVD player connected to the
Video 1 , Video 2 ,
ColorStream HD1 , ColorStream HD2 (component
video), or HDMI inputs on the TV, smoother motion can
be obtained by setting the Cinema Mode to Film .
To set the Cinema Mode to Film:
1
From the Video menu, highlight Picture Settings
and press
T
.
2
Highlight Advanced Picture Settings and press
T
.
3
In the Cinema Mode field, select Film .
4
To save the new settings, highlight Done and press
T
.
To revert to the factory defaults, highlight
Reset
and
press
T
.
To set the Cinema Mode to Video:
Select Video in step 3 above.
Using the ClearFrame ™ feature
The new ClearFrame 120 Hz anti-blur technology
doubles the frame rate from 60 frames per second to 120
frames per second, virtually eliminating motion blur
without adding flicker or reducing image brightness.
To turn on the ClearFrame:
1
From the
Video
menu, highlight
Picture Settings
and press
T
.
2
Highlight Advanced Picture Settings and press
T
.
3
In the ClearFrame field, select On .
4
To save the new settings, highlight
Done
and press
T
.
To revert to the factory defaults, highlight Reset and
press
T
.
Note:
• If you select one of the factory-set picture modes ( Sports ,
Standard , Movie , or PC ) and then change the ClearFrame
setting, the picture mode automatically changes to
Preference.
• When ClearFrame is set to Off , the Film Stabilization feature
will not be available (grayed out and set to Off).
Using the Film Stabilization feature
This feature helps to eliminate video shaking that can
occur when
Cinema Mode is set to Film (3:2 pull down
process enabled).
To turn on Film Stabilization:
1
From the Video menu, highlight Picture Settings
and press
T
.
2
Highlight Advanced Picture Settings and press
T
.
3
In the Film Stabilization field, select Smooth .
4
To save the new settings, highlight Done and press
T
.
To revert to the factory defaults, highlight Reset and
press
T
.
Note:
• If you select one of the factory-set picture modes ( Sports ,
Standard , Movie , or PC ) and then change the Film
Stabilization setting, the picture mode automatically
changes to
Preference .
• When Cinema Mode is set to Video or ClearFrame is set to
Off , Film Stabilization will be grayed out and set to Off
automatically.
52XV545U_EN.book Page 65 Monday, August 4, 2008 10:54 AM