No.
5
Part name
Control
P.C. board
Procedure
NOTE :
Unlock the lock of the housing part and then
remove the connector.
3)
Unlock the locks of the card edge spacer
(
4
positions) and then remove the control
P.
C. board.
2.
Attachment
1)
Fix the control P.C. board to the card edge
spacer (
4
positions)
2)
Connect the connector removed in item 1
as before and then fix the wiring with the
clamp.
3)
Following to work of item 2 of
2
, mount
the electric parts box cover and the
suction grille as before.
Remarks
SVM-13010_051-106.indd 92
SVM-13010_051-106.indd 92
2/1/13 2:49 PM
2/1/13 2:49 PM
1.
Detachment
1)
Carry out work of item 1 of
2
.
2)
Remove connectors which are
connected from the control P.C. board
to the other parts and then remove
wiring from the clamp.
CN510 : Louver motor (20P, White)
CN214 : Signal receiving unit
(
9
P, White)
CN34 : Float switch (3P, Red)
CN504 : Drain pump (2P, White)
CN101 : TC sensor (2P, Black)
CN102 : TCJ sensor (2P, Red)
CN104 : Room temp. Sensor
(2P,
Yellow
)
CN210 : Fan motor (5P, White)
Clamp
Card edge spacer
Card edge spacer
Card edge spacer
- 110 -
