7
MODE
AUTO
FAN
ECO
TIMER
TIMER
Hi-POWER
SWING
MEMO
FIX
FILTER
RESET CLOCK CHECK
ON
OFF
SET
CLR
2
START/STOP
PRESET
AM
:
MODE
AUTO
FAN
ECO
TIMER
TIMER
Hi-POWER
SWING
MEMO
FIX
FILTER
RESET CLOCK CHECK
ON
OFF
SET
CLR
2
1
START/STOP
PRESET
PM
:
AUTO
MODE
AUTO
FAN
ECO
TIMER
TIMER
Hi-POWER
SWING
MEMO
FIX
FILTER
RESET CLOCK CHECK
ON
OFF
SET
CLR
1
2
3
PREPARATION AND CHECK BEFORE USE
Loading the remote controller batteries.
1
Remove the cover, and insert the batteries.
2
Push the RESET button.
The clock display flashes.
Adjust the clock.
Place back the cover.
Batteries
• To replace the batteries, use two new batteries (AAA type).
• In normal use, the batteries will last about one year.
• Replace the batteries if there is no receiving beep from the indoor
unit or when the air conditioner cannot be operated using the remote
controller.
• To avoid malfunctions by battery leakage, remove the batteries
when not using the remote controller for more than one month.
Setting the clock
Before you start operating the air conditioner, set the clock of the
remote controller using the procedures given in this section.
The clock panel on the remote controller will indicate the time regard-
less of whether the air conditioner is in use or not.
Initial setting
When batteries are inserted in the remote controller, the clock panel
will indicate AM 0:00 and will flash.
1
TIMER button
Push the TIMER button to set the current time.
Each push of the TIMER button changes the time in one minute
steps.
Pushing the TIMER button continually changes the time in ten
minute steps.
2
SET
SET
button.
Push the SET
SET
button.
The current time is indicated and the
clock starts.
Clock adjusting
1
CLOCK button
Push the CLOCK button.
The CLOCK display flashes.
2
TIMER button.
Push the TIMER button to set the current time.
Each push of the TIMER button changes the time by one minute.
Pushing the TIMER button continually changes the time by ten
minutes.
3
SET
SET
button.
Push the SET
SET
button.
The current time is indicated and the clock starts.
• Slide off the cover while
pushing the sides.
• Battery replacement
Be careful not to reverse
the (+) position and the
(–) position.
MODE
AUTO
FAN
ECO
TIMER
TIMER
Hi-POWER
SWING
MEMO
FIX
FILTER
RESET CLOCK CHECK
ON
OFF
SET
CLR
Push CLOCK
