Toshiba Portege Z930 Series User Manual Download Page 95

Page: 95 / 138

Power on

Power off
(no operation)

AC adaptor

not

connected

Remaining

battery capacity

is above low

battery trigger

point

• Operates
• LED:

Battery

off

DC IN

off

Remaining

battery capacity

is below low

battery trigger

point

• Operates
• LED:

Battery

flashes orange

DC IN

off

Remaining

battery capacity

is exhausted

Computer shuts

down

Monitoring of power condition

As shown in the below table, the

Battery

DC IN

and

Power

indicators on

the system indicator panel alert you to the computer’s operating capability

and battery charge status.

Battery indicator

Check the

Battery

indicator to determine the status of the battery pack.

The following indicator lights indicate the battery status:

Flashing orange

The battery charge is low, the AC adaptor must

be connected in order to recharge the battery.

Orange

Indicates the AC adaptor is connected and the

battery is charging.

Green

Indicates the AC adaptor is connected and the

battery is fully charged.

No light

Under any other conditions, the indicator does

not light.

If the battery pack becomes too hot while it is being charged, the charge

will stop and the

Battery

indicator will go out. When the battery pack's

temperature falls to a normal range, charging will resume - this process will

occur regardless of whether the computer's power is on or off.

PORTÉGÉ Z930/Satellite Z930 Series

User's Manual

5-2

Summary of Contents for Portege Z930 Series











































































































































Search results

Summary of Contents for Portege Z930 Series

Reviews:

Related manuals for Portege Z930 Series

Brands by name

Popular brands

Toshiba Portege Z930 Series, User Manual

Search results

Summary of Contents for Portege Z930 Series

Reviews:

Related manuals for Portege Z930 Series

Brands by name

Popular brands