Toshiba Portege Z930 Series User Manual Download

Page: 125 / 138

Appendix D

Information for Wireless Devices

Wireless LAN Interoperability

The Wireless LAN is compatible with other LAN systems Direct Sequence

Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing

(OFDM) radio technology, and is compliant to:

The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n or b/g/

n), as defined and approved by the Institute of Electrical and

Electronics Engineers.
The Wireless Fidelity (Wi-Fi

) certification as defined by the Wi-Fi

Alliance

The Wi-Fi CERTIFIED™ logo is a certification mark of the Wi-Fi Alliance

Bluetooth wireless technology Interoperability

Bluetooth™ Cards are designed to be interoperable with the product with

Bluetooth wireless technology that is based on Frequency Hopping Spread

Spectrum (FHSS) radio technology, and is compliant to:

Bluetooth Specification (depending on the model you purchased), as

defined and approved by the Bluetooth Special Interest Group.

Logo certification with Bluetooth wireless technology as defined by the

Bluetooth Special interest Group.

Please note that it is not possible to confirm the operation of all functions of

all Bluetooth devices that are available. In view of this it may be noted that

some functions associated with a specific device might not operate

properly.

CAUTION about Wireless Devices

The wireless devices have not completed verification of connection and

operation with all devices which are using the Wireless LAN or Bluetooth

radio technology.
Bluetooth and Wireless LAN devices operate within the same radio

frequency range and may interfere with one another. If you use Bluetooth

and Wireless LAN devices simultaneously, you may occasionally

experience a less than optimal network performance or even lose your

network connection.

PORTÉGÉ Z930/Satellite Z930 Series

User's Manual

D-1

Summary of Contents for Portege Z930 Series











































































































































Search results

Summary of Contents for Portege Z930 Series

Reviews:

Related manuals for Portege Z930 Series

Brands by name

Popular brands

Toshiba Portege Z930 Series, User Manual

Search results

Summary of Contents for Portege Z930 Series

Reviews:

Related manuals for Portege Z930 Series

Brands by name

Popular brands